The load control cabinet of tungsten lamp tested by Guangzhou Sunho is in accordance with the requirements of UL 1054, UL 943 or IEC 61058 and IEC 60669 standards. Suitable for all kinds of switches to provide tungsten filament lamp load.
This coupling tension tester is applicable to the coupling with rated value greater than 0.2A Whether the connector is damaged under the corresponding tension.
It is suitable for 28 day test, time current characteristic test and instantaneous trip test of circuit breaker. The voltage can only be within ac30v when doing 9.10.2 test, and it needs to be customized if it is higher than ac30v. .
The non solid pin test device is used to determine the strength of the material of the non solid pin under a certain pressure, and whether to use obvious deformation under the specified test conditions.
The coupler plugging life testing machine tested by Guangzhou Sunho is in accordance with IEC 60320 and GB 17465.1/19, 20, . Optional push pull test. (pneumatic, dual station)
The mechanical strength test device of the multi position mobile socket tested by Guangzhou Sunho is used for the removable multi position mobile socket, in the corresponding test device. According to the standard IEC 60884-1.
The unit combustion test device of building materials or products tested by Guangzhou Sunho is designed according to the requirements of EN 13823, ISO 13943, EN 13501-1, EN 13238, GB 8624 and GB/T 20284.
The joint fire resistance test device tested by Guangzhou Sunho is designed according to relevant requirements of ISO 19921 and IEC 60188 standards. It is used for fire resistance test of pipes and pipe joints for marine and similar purposes under
The test control system is composed of temperature sampling control system, thermal radiation tester, signal acquisition system, computer system, and reasonable test and sampling circuit.