Products
Plug and Supply Cord Bending Tester SH9302B
Plug and Supply Cord Bending Tester SH9302B
The Plug and Supply Cord Bending Tester SH9302B is designed and manufactured in accordance with IEC50227-2 and IEC60335-1. It conducts bending test on plugs or supply cords of household appliacnes.
Supply Cord Pull and Torque Tester SH9301A
Supply Cord Pull and Torque Tester SH9301A
The Supply Cord Pull and Torque Tester SH9301A is designed and manufactured in accordance with the clause25.15 of IEC60335-1/EN60335-1
Wires and Cables Combustion Gas Tester(halogen acid gas) SH5508
Wires and Cables Combustion Gas Tester(halogen acid gas) SH5508
The Wires and Cables Comubustion Gas Tester(halogen acid gas) is designed and manufactured in accordance with IEC60765-1 and IEC60754-2
Foot Warmer Flexing Tester SH9309F
Foot Warmer Flexing Tester SH9309F
The Foot Warmer Flexing Tester SH9309F is designed and manufactured in accordance with IEC60335-2-81(clause 21.101)
Wires and Cables Snatch Tester SH9331
Wires and Cables Snatch Tester SH9331
The Wires and Cables Snatch Tester SH9331 is designed and manufactured in accordance with IEC60227-1(clause5.6.3.3), IEC60227-2(clause3.3)
Temperature pressure Test/Testing Instrument
Temperature pressure Test/Testing Instrument
It is design according to the relevant standard requirements of the national standards of IEC60811 and the requirements of IEC540.8.1 international standards, can for the wire and cable manufacture factory and the testing departments to use. It is the ins
Dumbbell knife
Dumbbell knife
It is designed according to the relevant standard requirements of IEC 60227-2.
Punch machine
Punch machine
It is designed according to the relevant standard requirements of IEC 60227-2.
Low temperature tensile test/testing Machine (Excluding low temperature test chamber)
Low temperature tensile test/testing Machine (Excluding low temperature test chamber)
It is design according to the relevant standard requirements of IEC540 Article 9 in the IEC ( IEC540-9.3.9.4 ) and the statements of IEC 60811-1-4 Sub Clause 8.1. Specially used to the instrument of the aging tensile test of the polymer materials and low
Wires and Cables Flexing Testers SH9311B
Wires and Cables Flexing Testers SH9311B
The Sunho Wires and Cables Static Flexing Testers is designed and manufactured based on the GB5023.2 standard. It conducts static flexing tests on wires and cables.
Wire and cable wearproof tester SH9307
Wire and cable wearproof tester SH9307
The wire and cable abrasion tester tested by Guangzhou Xinhe is designed according to the requirements of abrasion test in GB5013.1 and GB5013.2. Mainly used for abrasion test on rubber insulated cables with rated voltage of 450 / 750V and below.
Wire and cable air tightness test device SH9166B
Wire and cable air tightness test device SH9166B
The wire and cable air tightness testing device tested by Guangzhou Xinhe mainly uses high-precision pressure transmitters to sample, and sends various signals to the computer for data collection, storage, and discrimination through intelligent controller
 123