Products
Artificial Intelligence Motor Load Cabinet SH6347
Artificial Intelligence Motor Load Cabinet SH6347
Artificial intelligence motor load cabinet is designed to facilitate customers to adjust parameters. Even inexperienced operators can accurately and quickly adjust the required parameters.
Artificial Intelligence Fluorescent Lamp Power Load SH6344
Artificial Intelligence Fluorescent Lamp Power Load SH6344
The artificial intelligent fluorescent lamp load cabinet of Guangzhou Sunho Testing Equipment Co., Ltd. is a supporting equipment designed according to the relevant provisions of IEC 60884-1, IEC 60669-1, IEC 61058, IEC 60320-1, UL1054.
Artificial Intelligence Common Pure Resistance Power Supply Load Cabinet SH6342A
Artificial Intelligence Common Pure Resistance Power Supply Load Cabinet SH6342A
The device adopts touch screen display, PLC programmable intelligent controller, Chinese operation menu and friendly man-machine interface. The menu provides 30 sets of fixed mode preset functions, and 10 sets of custom modes, which make it easy for users
Ballast lamp tube load measuring and controlling cabinet SH6332
Ballast lamp tube load measuring and controlling cabinet SH6332
The equipment adopts professional design, which has a generous and beautiful overall appearance and is durable. Casters are installed below the box body for easy movement. The equipment is controlled by high-grade PLC, and the display interface is 7 Inch
Wire and cable beating tester SH5512
Wire and cable beating tester SH5512
Peening wire and cable tester is designed according to the standard of BS6387: This test equipment used to test the wire and cable under the overheating and the over-flow and other unnormal conditions, the flame retardancy function of the insuler.
Electrical products power cord twist tester SH9309C
Electrical products power cord twist tester SH9309C
It is design according to the relevant standard requirements of UL964. Mainly for connector of the electrical products and the line to go on the distort test.
Wire and cable Short-circuit test device SH5515
Wire and cable Short-circuit test device SH5515
Simulate fire hazard test environment, wires and cables on real burning environment, do test for wires and cables on special current short-circuit condition. Test data is used to assess the burning performance of materials at fire hazard.
Wire and Cable spark tester SH2500
Wire and Cable spark tester SH2500
Tester shell and important parts adopts stainless steel, corrosion resistant and durable, the pearl necklace and gap adopted by tester electrode are designed according to relevant standard requirements. Attached with interlock switch, mechanical chain gro
Wire and cable fire resistance tester SH5509C
Wire and cable fire resistance tester SH5509C
The shell of the test chamber and the important components are all manufactured by stainless steel, resistant cigarettes and gas corrosion; The automatic degree of control system is high, has automatic ignition function, temperature and time figures show,
Wire and cable water spray burning tester SH5511
Wire and cable water spray burning tester SH5511
It is designed according to the standard of BS6387: This test equipment used to test the wire and cable under the overheating and the over-flow and other unnormal conditions, the flame retardancy function of the insulation layer.
Hot Set Test Apparatus SH9317
Hot Set Test Apparatus SH9317
It is design according to the relevant standard requirements of the IEC60811. Detect the insulation of wire and cable and sheathing, the elongation under the hot and load conditions and the permanent deformation.
Three idler pulley twist tester SH9311D
Three idler pulley twist tester SH9311D
It is design according to the relevant standard requirements of IEC245-1(1980) and IEC60245 and the national standard of IEC60227, apply to wire and cable and inspection departments for the wire and cable and soft line to do the dynamic song torsion test.