Products
160A power supply verification device
160A power supply verification device
Designed and manufactured in accordance with the requirements of IEC 61347-1:2007 +A1:2010+A2:2012, clause 14.7, to verify that the power supply is capable of carrying a fault current of 160A-0±10%rms. With load.
Capacitance and Loss Tester (Low Voltage Method)
Capacitance and Loss Tester (Low Voltage Method)
According to the requirements of IEC 60252-1 standard, it can test the capacity, loss angle and other parameters of capacitors under different voltages and frequencies.
Capacitance and loss angle tangent test
Capacitance and loss angle tangent test
According to the relevant requirements of IEC 60252-1 standard, test capacitors at different voltages, different frequencies, capacity, loss angle and other parameters; can be used to measure the high voltage, high-current method, the capacitance capacity
Capacitance Impulse Voltage Tester
Capacitance Impulse Voltage Tester
Capacitor impulse voltage tester is designed according to IEC60384-14 standard, it is a high voltage DC impulse voltage tester, with over-current and over-voltage protection circuit, and is equipped with a good safety performance test fixture.
Tungsten lamp load control cabinet
Tungsten lamp load control cabinet
Designed according to IEC 60669-1 design and manufacture, electrical life test and other related regulations and designed supporting equipment. It is suitable for various switches to provide tungsten lamp loads that meet the requirements.
Resistive power load cabinet
Resistive power load cabinet
​​​​​​​Resistive power load control cabinet is designed according to the national standards on the structure of electrical accessories, electrical life and other relevant provisions of the supporting equipment. It is designed and manufactured according to
Solar Panel Combustion Tester
Solar Panel Combustion Tester
The solar panel combustion tester is designed according to the relevant requirements and reference structure of UL790, Diagram A1 and Diagram A2.
Blanket surface flame tester
Blanket surface flame tester
Blanket surface flame tester is designed and manufactured according to ASTMD 4151. It is used to conduct a short flame impact test on the surface of the specimen.
Building materials burning calorific value testing machine
Building materials burning calorific value testing machine
Designed and manufactured according to ISO 1716, EN 13501-1 and other relevant standards, the high-precision microcomputer full-automatic calorimeter is used for the determination of the calorific value of combustible materials such as solids, liquids, et
Fire retardant wood burning tester (Wooden crib method)
Fire retardant wood burning tester (Wooden crib method)
Fire retardant wood burning tester (Wooden crib method) is developed according to the technical requirements of ASTMD160 and GA/T42.1. It is suitable for testing the burning quality loss rate and flaming time of fire retardant treated wood under the speci
Building material flame retardant tester
Building material flame retardant tester
The tester is designed for the testing of building materials according to DIN 4102-1 and is used to determine whether a material is flame retardant or not. The tester consists of combustion chamber, burner and control instrument. The combustion chamber co
Building material burning tester
Building material burning tester
According to ISO11925-2, the flammability of building products is determined by direct impact of a small flame on a vertically placed specimen in the absence of applied radiation. Under the condition of no external radiation, a small flame is used to dir