The SH9154 Rotating Barrel Tester is designed in accordance with IEC60068-2-31 clause 5.3, Annex A and Fig. A.1, to conduct rough handling shock test for specimens.
The SH9406A Socket Withdrawal Force Tester is applicable to conduct test to evaluate the minimum and maximum withdrawal force to pull the standard pin(s) out of the socket in accordance with IEC60884-1:2013 clause 22
The SH9442 installation box is designed in accordance with IEC60884-1:2013 clause 19. It is applicable to provide a draught-free environment for the temperature rise test of surface-type socket-outlet.
The SH9419 Temperature Rise Pinewood Testing Block is applicable to the temperature rise test for socket-outlets, compliant with IEC60884-1:2013 clause 19
The SH9431 Terminals Flexing Device is applicable to the deflecting of screwless terminals in accordance with IEC60884-1:2013 clause 12.3.12. It is designed in accordance with IEC60884-1:2013 fig. 12.
The SH9306 Conductor Damage Checking Test Apparatus is designed in accordance with IEC60884-1:2013 fig.11. It is applicable to conduct damage checking test for conductor in accordance with IEC60884-1:2013 clause 12.2.5
The SH9425 Plug Compression Tester is designed in accordance with IEC60884-1:2013 clause 10.1 clause 24.5 and Fig.8 . It conducts compression test for plugs to assess its mechanical strength.
It is designed according to the surge voltage test requirements in IEC60065 standard and the relevant standards requirements of IEC61144.
Used to detect the instantaneous insulation bear surge impact between the touchable components and its connected com