High temperature environment type switch life tester
According to IEC 61058.1/IEC 61058-1-1/IEC 61058-1-2/IEC 60669-1 and other relevant standards, it can be used to test the mechanical life of key switches, boat switches and rotary switches. It can be used to carry out mechanical life test for key switches, boat switches and rotary switches. With the SH6300 series load cabinet, it can realise the electrified life test of switches. The test can be used for the mechanical life test of key switches, boat switches and rotary switches. It is suitable for switch samples with rated current up to 20A.
Technical Parameters:
1, working power supply: AC 220V /50HZ.
2, temperature range: room temperature - 150 ℃, temperature fluctuation ± 1 ℃, uniformity ± 3 ℃.
3, test rate: 15-30 times / min, can be set and displayed on the touch screen.
4, on-off (disconnect) time: 0.5 ~ 99.9s can be set, precision: 0.1s; on-off cycle time: 1 ~ 99 seconds can be set.
5, Test on/off mode: with intelligent control system, it can control the load on/off individually.
6, counter: 1 ~ 999999 times can be preset, the number of tests to reach the automatic shutdown.
7, the number of failures: 1-99 times can be set arbitrarily.
8, drive mode: stepping motor (double motors for each station).
9, workstation: 3, each workstation independent drive, each workstation independent counting (in kind and contract shall prevail).
10, display and control mode: touch screen + PLC intelligent controller
11, Intelligent discernment function (need to support the load cabinet): when the switch bonding, continuous connection or disconnection, to the set number of times
number (the number of abnormalities 1-99 times can be set arbitrarily) can be alarmed.
12, Accidental power failure in the test process, the data of accidental power failure is automatically saved.
13, Intelligent discernment function: when the switch bonding, continuous connection or disconnection, to the set number of times can be alarmed.
14, with two different types of switch test mode.
14.1. Key (Warp) switch test
14.1.1 Driving mode: stepping motor.
14.1.2, Pusher stroke: about 20mm.
14.1.3, line speed 0.5-100mm/s
14.1.4, Test speed:15-30 times/min.
14.2, Rotary switch test
14.2.1, Rotation angle:15°~360°adjustable.
14.2.2 Test rate:1°~90°/s, in 9 degree increments.
14.2.3 Rotary gear: 1~9 gears can be set.
14.2.4, rotation mode: unidirectional rotation or bidirectional rotation adjustable, using stepper motors for precise positioning.
14.2.5 Test speed: 15~30 times/min.
