Products
Tungsten lamp load counter SH6306
Tungsten lamp load counter SH6306
The load control cabinet of tungsten lamp tested by Guangzhou Sunho is in accordance with the requirements of UL 1054, UL 943 or IEC 61058 and IEC 60669 standards. Suitable for all kinds of switches to provide tungsten filament lamp load.
Coupling implement pull force tester SH9422
Coupling implement pull force tester SH9422
This coupling tension tester is applicable to the coupling with rated value greater than 0.2A Whether the connector is damaged under the corresponding tension.
Circuit breaker time - current characteristic tester
Circuit breaker time - current characteristic tester
It is suitable for 28 day test, time current characteristic test and instantaneous trip test of circuit breaker. The voltage can only be within ac30v when doing 9.10.2 test, and it needs to be customized if it is higher than ac30v. .
Heating Test Device used in the experiments
Heating Test Device used in the experiments
The coupler heating device tested by Guangzhou Sunho is in accordance with IEC 60320-1 Figure 13.
Non-solid implant test device
Non-solid implant test device
The non solid pin test device is used to determine the strength of the material of the non solid pin under a certain pressure, and whether to use obvious deformation under the specified test conditions.
Coupler insert push and pull life tester SH9416
Coupler insert push and pull life tester SH9416
The coupler plugging life testing machine tested by Guangzhou Sunho is in accordance with IEC 60320 and GB 17465.1/19, 20, . Optional push pull test. (pneumatic, dual station)
Pin insulation shield abrasion resistance tester SH9415
Pin insulation shield abrasion resistance tester SH9415
It is designed according to the clause 2.13.13.6 of and IEC -884, to test the wear-resistance performance of the pin insulation shield of the plugs.
Mobile multi-place socket mechanical strength testing machine SH9412A/B
Mobile multi-place socket mechanical strength testing machine SH9412A/B
The mechanical strength test device of the multi position mobile socket tested by Guangzhou Sunho is used for the removable multi position mobile socket, in the corresponding test device. According to the standard IEC 60884-1.
Anti-deformation test piece SH9411
Anti-deformation test piece SH9411
The deformation resistance test piece of Guangzhou Sunho testing is designed and manufactured according to IEC 60320-1.
Sudden pull tester SH9409
Sudden pull tester SH9409
The sudden pull test machine for Guangzhou Sunho testing is based on the requirements of clauses 90 and 91 in UL817. It is mainly used to test the connection strength between the plug and the conductor of the moulded power plug and the burst strength of t
High temperature environment type switch life machine SH9402T-Q
High temperature environment type switch life machine SH9402T-Q
Guangzhou Sunho High Temperature Environmental Instrument Switching Life Machine (including high temperature box, intelligent digital display) is designed and manufactured according to the relevant provisions of IEC 61058-1, IEC 669-1 and UL1054 standards
Switch Endurance Tester SH9402AB
Switch Endurance Tester SH9402AB
SH9402AB Switch Endurance Tester is designed and manufactured based on IEC61058 standard. It conducts switch endurance test on rotary switch, push-button switch and rocker switch samples.