Electrical plastic film tester
Designed and manufactured in accordance with IEC 60674-2 "Test Methods for Electrical Plastic Films", Article 27 "Flammability".
Technical Parameters：
1, Power supply: AC220V + 10% / 50Hz.
2, The gas source of the test flame using gas or liquefied petroleum gas (under the conditions recommended to choose a better gas).
3, Burner inner diameter of C 9 + 0.5mm, length of about 100mm + 10mm, with air adjustment holes, the flame height is convenient to adjust.
4, Specimen mandrel: diameter 9.5 + 0.5 mm mandrel.
5, With vertical fixed test round fixture
6, The inner flame blue flame height: adjustable to the standard requirements of the 20š1mm
7, Flame application time and holding time can be set arbitrarily within the range of 0 ~ 300 seconds.
8, The number of times the flame is applied: 1-99 times can be set.
9, Test angle: 0 °, 45 °, according to the test mode automatically adjusted, no need to adjust by hand.
10, Sample: length 200mm, width 50mm.
11, With gas flow meter and pressure adjustment
12, Ignition mode: electronic automatic ignition
13, Display + control: touch screen + intelligent control system, Chinese operation interface. Stable and reliable performance.
14, Automatic control of the test process: through the cylinder control, can ensure that the burner in the application of flame quickly leave the test piece, withdrawal distance
≥150mm; vertical direction through the motor control, can maintain a constant distance between the sample and the flame.
15, Cylinder gas source: 6-8kg (users to provide their own air compressor)
16, Suggested test gas: methane (user's own)
17, Accompanied with a flame height gauge.
18, With 500mm accurate to 1mm steel ruler.
19, With wireless infrared remote control, after closing the door, you can start or stop the test from a distance.
20, With a fume cupboard: chassis material for the A3 steel plate, fume cupboard volume ≥ 0.5m3, the inner wall with colour
