Products

Flame and heat resistance test

Material flame and heat resistance Building material flame and heat resistance Fire detector test device Wire and cable flame and heat resistance Others

Wire and cable test

Plug and socket/ switch test

Breaker performance test Multifunctional temperature rise measuring instrument Plug and socket life testing machine Membrane switch life testing machine

Household appliance test

IntegrateD stove anti-gravity impact device Artificial Intelligence Electrical Load Cabinet Intelligent self-ballasted power supply load control cabinet Life Testing Machine for Cabinet Doors of Refrigerators and Other Similar Products Odor reduction laboratory Oil separation degree experimental device Aerodynamic Performance Test Device Integrated stove durability test device

Water proof (IP) test

Vertical Dripping Testing Device Swing tube raining device

Electric heating pads/ toy test

Electric heating pad distort tester Pyrolytic self-cleaning oven spark generator Automotive interior accessories burning tester

Controller universal test

Integrated stove door life testing machine Pendulum impact test device Standard test means, array, pin Coating Scratch Resistance Testing Machine Electronic Sudden Jumptemperature Limit Protector Durability Materials Test

Other equipment

Medical device test

Capacitance test

Lamp mechanical and performance test

Curtain fabric flame tester SH5810
Curtain fabric flame tester SH5810 Curtain fabric flame tester SH5810

Curtain fabric flame tester SH5810

Item No.: SH5810
Guangzhou Sunho tested curtain curtain burning tester according to NFPA 701 standards. For curtain cloth, floor burn test for blankets, pleated clothing, etc.
INQUIRY
Description
Curtain fabric flame tester


Technical Parameters:

1. Power supply: AC220V + 10% / 50Hz.

2. Test pressure: 17.5 kPa ± 2.0 kPa, using methane gas with a purity of not less than 97%.

3. Rotameter: air 895 ml / min + 25 ml / min; methane 1205 ml / min + 35 ml / min.

4. Burner: Pre-mixed type with grill on top.

5. Flame test height: 100 mm + 10 mm.

6. Timing range: 0 ~ 99min99s can be set.

7, test machine size: not less than 675 width x 700 height x 500 depth mm.

8. Sample rods and holders: 9x9x190 mm stainless steel sample fixing rods, rods. Above 37, 66, 95, 124 and 1 53mm

9. Don't protrude 5 steel needles with a diameter of 0.7mm (0.027in.) And a length of 11mm.

10. Using intelligent controller, it can realize automatic and manual interchange operation in the whole process.

11, including flame height ruler, movable clip.
Review

1/3
X
Miss Ji Miss Ji
Miss Ji