Capacitance and Loss Tester (Low Voltage Method)
According to the requirements of IEC 60252-1 standard, it can test the capacity, loss angle and other parameters of capacitors under different voltages and frequencies.
Technical Parameters
1, Power supply: AC220V±10%.
2, Test parameters: C-D, R-D
3, The basic accuracy of 0.1%.
4, Equivalent circuit: series, parallel.
5, Range mode: automatic, hold.
6, Test speed: 2 ~ 12 times / sec.
7, Calibration function: open circuit, short circuit, sweep zero.
8, Display mode: direct reading / O / O%.
9, Display: 5-bit resolution, with backlight special LCD display.
10, Measuring signal frequency: 100Hz, 120Hz, 1kHz, 10kHz, 20kHz, 40kHz, 50kHz, 100kHz.
11, Measurement signal level: 0.1Vrms, 0.3Vrms, 1.0Vrms.
12, Output resistance: 30Ω, 100Ω optional.
13, Measurement display range R:0.001Ω ~ 99.999MΩ
C:0.001 pF ~ 99999μF
D:0.0001 ~ 9.9999
Δ:- 99.99% ~ 99.99%