Products

BS6391 Fire Hose Abrasion Resistance Tester

Item No.: SH9601C
The SH9601C Hose Abrasion Test Apparatus is designed in accordance with BS6391 Annex I, simulating the abrasion condition of fire-fighting hoses under working status. Driven by pneumatic cylinder, the Al2O3 abrasing strip carrier would move reciprocally,
INQUIRY
Description
The SH9601(C) Hose Abrasion Test Apparatus is designed in accordance with BS6391 Annex I, simulating the abrasion condition of fire-fighting hoses under working status. Driven by a pneumatic cylinder, the Al2O3 abrasing strip carrier would move reciprocally, rubbing against the hose surface at a 45° angle.

Technical Parameters:
 
General Specifications
Display and Control  7-inch touchscreen + PLC controller
Driving Device  pneumatic cylinder chamber
Chamber Dimension  2000mm×800mm×1400mm(Length×Width×Height)
Chamber Material  #304 stainless steel
Water Supply  max. pressure ≥ 1MPa
Compressed Air Supply  dry-filtered air of 4-8kgf
Test Control
Test Cycles  0-999 cycles
Test Frequency  30-70 cycles/min
Test Mode  Auto/Manual (automatic/manual stop when test piece bursts)
Stroke Length  230mm
Water Pressure Detection  0-1.5MPa
Downward Force  15.5N (≤±0.5N)
Height Adjustment Range  ≥250mm
 

SH9601(C) BS6391 Fire Hose Abrasion Resistance Tester
Review


1/3
X