Boom Dynamic Damping Tester
Technical parameters:
1、motor: servo motor; rate 30%.
2、sensor: S-type load cell, range O-1KN, precision: 0.5N.
3、structure: vertical total height of 1.85 m to facilitate the operation, the clamping part of the design in accordance with the suspension system (should not damage the suspension system), the chuck part of the position can be adjusted, the entire test device using aluminium profiles to set up the frame structure; (refer to the following structure schematic diagram)
4、Electrical cabinet: equipped with emergency stop, power switch with electric safety protection function.
5、equipped with computer: with Lenovo brand 19-inch LCD computer and software systems.
6、Transmission mode: synchronous belt.
7、Travel adjustable: 0-500mm, the transmission mechanism uses servo motor driven ball screw up and down movement.
8、software design: with power-down test data preservation, continue power to continue testing the protection function.
a. Servo regulation;; b. The ability to synchronise the recording and display of the time - the time of the test.
b. can synchronously record and display the time - force, self-selected after the smooth data, and output data and calculation results.
c. The spring coefficient and working stroke in the software calculation formula are adjustable.
9、the software starts to run after 20 cycles automatically stop collecting data, take the number of frequency: more than 50 / sec.