Anti-siphon tester
According to IEC 60335-1 Article 22.48, IEC 61770-2008 requirements for the design and manufacture of test samples can be judged in the critical water level with or without siphoning phenomenon occurs;. The test equipment is characterised by vacuum pump, vacuum storage tank, the test specimen vacuum loading quickly, the equipment contains anti-backsiphonage device to protect the vacuum pump is not damaged security; test procedures are automatically controlled, easy to use, stable and reliable.
Technical parameters:
1、Vacuum generation mode: vacuum pump.
2、Pressure:0.065Mpa，better than ±0.015MPa.
3、Resolution:±10Pa.
4、Testing time:0~999S,accuracy±0.1S.
5、Control mode: touch screen + PLC.
6、Intelligent system, can set the test parameters. If the test pressure value cannot be reached, the system will alarm and can set the system protection time for specimen failure judgement. Protection time.
7、Water inlet size:1/2 inch;Water outlet size:1/2 inch;Drainage outlet size:1/2 inch;Piping should be transparent piping, equipped with transparent hose, can be directly connected with the washing machine water inlet valve. directly connected with the water inlet valve of the washing machine.
