Organic material fuel pipe horizontal and vertical flame tester / tester
Technical Parameters:
1. Bunsen burner with an inner diameter of 9 +0.5 mm and a length of about 100 mm.
2. Flame height is easy to adjust and can be according to standards
Requires adjustment from 20 mm to 175 mm.
3. Flame application time and holding time can be adjusted within the range of 0-99 minutes and 99 seconds.
4. With flow meter and pressure regulator (auto ignition).
5. Test pressure: 4 bar.
6. Test temperature: 750-800 degrees, thermometer display.
7. Fume hood (chassis material can choose A3 steel plate or S304 stainless steel). ventilation
Cabinet volume (> S304 stainless steel) 0.5m3.
8. The interior wall is sprayed with black matte paint, the illumination is less than 20lx. Easy to observe
To test flame.