Oscillating Spray Testers (IPX3/IPX4) in IP Enclosure Protection Classes
The Oscillating Spray Testers r is a specialised artificial rain test equipment for simulating natural conditions. Its main purpose is to assess the performance and reliability of electrical and electronic product enclosures and seals after water testing.
During the test, the pendulum rain tester simulates rainfall conditions to check the sealing and waterproof performance of the product. At the same time, it can also be used to check the working performance and technical status of the product to ensure that the product will not be affected by water during use.
SH8101B Oscillating Spray Testers (IPX3/IPX4) is used to test the protection performance of appliances with rainfall protection function according to the requirements of IEC 60529 and other relevant standards. Pendulum pipe rain test machine by the pendulum pipe bracket, pendulum pipe drive, work rotary table, electrical control of four parts, including bracket, rotary table shield, water storage tank, test water pressurised reflux device, the control desk using SU304 stainless steel hairline plate production.
Technical parameters:
1. Working power supply: AC 220V±10%, 50Hz
2. Pendulum angle: 20 ~ 180 ° can be set (due to the limitations of the turntable, the actual angle of the maximum of about 170 °), the use of high-quality motor-driven control mode
3. Pendulum radius: 200mm, 400mm, 800mm, 1000mm optional two specifications (conventional, optional more specifications at an additional price), corresponding to the IPX3/4 two specifications, the pendulum tube installed at both ends of the balance block
4. Pendulum material: S304 stainless steel.
5. The support frame on both sides of the pendulum tube is made of high-quality aluminium alloy, and there are several holes on the support frame, so that the centre of the pendulum tube can be adjusted up and down according to the test needs during the test, and the height of the centre of the pendulum tube is adjustable from 600 to 1800mm.
6. Spray hole: Φ0.4mm, distance between two holes: 50mm, the nozzle adopts removable No.6 pinhole structure, which is easy to clean or replace. The spray angle can be adjusted so that the sprayed water is always aligned with the centre of the pendulum pipe.
7. rain water pressure: 100KPa ≤ water pressure ≤ 500KPa, specifically to meet the standard flow requirements set out in Table 9 (water supply by the demand side to provide their own)
8. swing time: every 1s turn 60 °, 1 ~ 12s can be set up
9. Materials: water contact parts such as pendulum tube are s304 stainless steel, pendulum frame is high quality aluminium alloy profiles
10. With pressure gauge and glass rotor flowmeter.
11. test time: 1 ~ 99h59m59s
12. Configuration of industrial precision filters, cartridges can be replaced
13. turntable: the lower test bench diameter of 800mm, height of 400mm (off the ground), suitable for heavy test items; on the test bench diameter of 300mm, height of 300 ~ 1200mm (adjustable, off the ground), suitable for light trinkets, the small test bench placed on a large test bench, can be detached and lifted
14. the test bench speed: 1 ~ 3r/min (adjustable)
15. rotary table load: the maximum load of not more than 60KG
16. Control system: touch screen, digital display
Oscillating Spray Testers is suitable for natural conditions based on the artificial rain test, without considering the high temperature of the specimen and rain temperature temperature difference caused by a large number of water. It can provide a reference basis for the technical standard of the product to ensure that the product will not be affected by water immersion in the process of transport or use.
In conclusion, the Pendulum Rain Tester is a very important test equipment which can help manufacturers to assess the reliability and durability of their products to ensure that the products will work properly and will not be affected by water during use.
