Comparison and progress of old and new washing machine oiling technology
In the production process of washing machines, oiling is an important part of the process, which ensures the lubrication and stability of the washing machine when it is running. However, there is a significant difference between the past washing machine case oiling machine and today's automatic washing machine oiling machine.
significant differences. This article will focus on comparing the two technologies and discussing the improvements that have been made to modern automatic greasers.
In the past, case coaters have been in use for many years; however, over time, these machines have become obsolete and inadequate. In the process of use, the oiling process often has serious pulling and dripping phenomenon, which not only affects the quality of the product, but also requires an additional worker to carry out auxiliary operations. As a result, enterprises need to bear higher labour costs, while work efficiency can not be improved.
Compared with the past, nowadays the automatic oiling machine for washing machine has been improved and innovated, which brings many advantages. Firstly, the automatic greasing machine uses intelligent technology to automatically align the greasing jacks and complete the greasing process accurately. In contrast, in the past, greasing machines were manually operated by workers, with inaccuracies caused by the human factor. The use of this intelligent technology makes the greasing process more accurate and efficient.
Secondly, the emergence of modern automatic greasing machines has also greatly reduced labour costs. Since automatic greasing machines do not require additional workers to assist, enterprises can save human resources and reduce production costs. This not only benefits the enterprise's own economic interests, but also promotes the improvement of production efficiency.
Most importantly, the new automatic oiling machine improves the problem of oil dripping from wire drawing. Through precise design and application methods, the automatic oiler is able to reduce or eliminate this phenomenon, thereby improving product quality and consistency. This was a problem that required extra attention in the past with oiling machines, and the automatic oiler is better able to address this challenge.
Guangzhou Sunho Inspection Equipment Co., Ltd. is now cooperating with Skyworth to develop and produce a washing machine automatic oiling machine, which improves the problem of oil dripping from wire drawing in the past, and reduces the cost of the enterprise with intelligent technology and robots. The following are the technical parameters:
1, using 2 sets of SCARA robot oiling, flexible production;.
2、Using spraying method to apply oil, no contact with the washing machine case, no damage to the product;.
3、Oil quantitative control, no pulling, no oil dripping, reduce oil waste.
4、Production beat is less than 12 seconds (line for the speed chain, work plate, blocking cylinders, product in and out of the time is less than 4 seconds, equipment time is less than 7 seconds).
5、At present, there is one kind of grease, and the equipment software has two kinds of grease (domestic and imported), and the equipment organisation reserves the function of upgrading and transforming the two kinds of grease, and it can be switched by key.
