Wire and cable water spray burning tester
technical parameter:
1. Burner: Propane gas spray lamp with Venturi mixer. The combustion test temperature is 650-950 C.
2. Temperature measurement with a diameter 1.5mmK thermocouple.
3. The water supply pressure of the sprinkler head is 250-350 kPa, and the flow rate of the sample is 0.25-0.3L/s.m2.
4. The test length is about 400 mm.
5. The test is carried out in a case cover with a water pan.
6. During the test, the test cable is electrified by isolating transformer, connected to 3A safety pipe or circuit breaker,
and the on-off signal lamp indication of each phase cable.