Products

Wire and cable fire tester SH5509

Item No.: SH5509
Wire and cable fire resistance tester is designed according to the relevant standard requirement of IEC60331 and BS6387.
INQUIRY
Description
 
Wires and Cables Fire Resistance testing equipment    

    Wire and cable fire resistance tester is designed according to the relevant standard requirement of IEC60331 and BS6387. Using it to test the wire and the cable in certain fire source and the time specified conditions the operation capability of them in the specified state. 
   The tester is composed by the test part and control part, using the integrated design, to facilitate the installation at the scene and debug. The important components are all manufactured by stainless steel, resistant cigarettes and gas corrosion.
Using the propane gas or liquefied petroleum gas as the test flame.

 
1.The Technical parameters of the control cabinet:
2.With double flow-meters and Pressure Regulator.
3.The process of the test is automatic control.
4.With intelligent detection function, when the sample become short circuit in the testing process, turn off the flame source and automatic fire alarm
5.Display: Touch screen display the temperature curve.
6.Time calculator: 0-99 hours 99 minutes and 99s.
7.The size of the control cabinet: 650*400*1200
8.Load(selective): Test voltage 0-1000V (settable),including 4 routs
9.Current load range: 0.1~.025A, the test current is adjustable according to the standard, when the current larger than 0.25A, it will automatic protect.
2, Fire resistance test device requirements:
10. With ribbon type propane gas burner having venturi mixer,Length 500mm, with 3 row air hole,which diameter is 1.32mm and have 3.2mm distance between each hole .
11.The diameter of the metal supporting rings is about 150 mm, made of 10mm diameter steel rod.
12.With temperature measurement device (with the type of K thermocouple, the distance between the flame orifice is 75mm).
13.According to the test class, the flame temperature is adjustable from 600 to 1000°, (Class A is 650°, class B is 750°, and the class C,D is 950°).
14.Stainless steel sample bracket, bearing 30 kg
15.Touch screen +PLC
Review


1/3
X