Products

Textile flame tester SH5804B

Item No.: SH5804B
Applicable to the measurement of the number of flame exposures when the textile is heated to a specified length at 45 °. The combustion chamber is made of mirror stainless steel, with an exquisite shape. The smoke-resistant corrosion control part is contr
INQUIRY
Description
Textile flame tester
 
       Under the specified conditions, place the sample at an angle of 45 degrees, ignite the sample, and measure the time required for the sample to burn upward with a flame for a certain distance. It is used to characterize the severity and speed of burning once flammable textiles are worn.

      Applicable to the measurement of the number of flame exposures when the textile is heated to a specified length at 45 °. The combustion chamber is made of mirror stainless steel, with an exquisite shape. The smoke-resistant corrosion control part is controlled separately from the test part. It has a high degree of automation and complete system protection functions, which can ensure safe long-term stable and trouble-free operation.
 

Technical Parameters:

1. Power supply: AC220V ± 10% / 50Hz.

2. Tilt of sample holder: 45 °.

3. Timer: 0 ~ 99s ± 0.1s.

4. Burner: made of a 4.5 gauge syringe needle.

5. Test clip size: 205 × 76.

6. Sample size: 150 × 50mm.

7. Sliding trolley: using stainless steel guide rail and linear bearing, high sliding accuracy, no crawling and jumping. Hairbrush: Use 0.4mm nylon bristles, 19mm long, 20 tufts per cluster, and 4 tufts per 25mm. Bristle pressure: 14.7N ± 0.5N adjustable.
Review


1/3
X