Products

Oscillating Spray Testers (IPX3 and IP X4) SH8101

Item No.: p15
It is designed according to the relevant standard requirements of IEC60335、NO13.2.3 in the IEC60529 and IEC60068,Used to test the protective performance of the apparatus which has water proof function.
INQUIRY
Description
       Oscillating Spray Testers (IPX3 and  IP X4)

It is designed according to the relevant standard requirements of IEC60335、NO13.2.3 in the IEC60529 and IEC60068, 

Used to detect the protective performance of the apparatus which has anti-drenched function. The swing of the angle using fixed angle stalls (such as 60、90 and 180 degrees)of the motor drive control ways or matching stepper motor drive control ways.




Technical characteristics:
1、Tube radius: 0.6m and 0.8m, each size 2 tube ( for IPX3 and IPX4 test )
2、The angle of the placed tube: ±60° in vertical direction and the vertical direction ±90 and 180. (Note:180 °only suit to test the small-scale items, if turntable restrictions the practical angle may be too small).
3、Central height of the placed tube: 600 ~ 1200mm.
4、Orifice: φ0.4mm the spacing of two holes is 50mm.
5、Pressure: 100~500Kpa
6、Oscillating frequency: 60°/s
 
Turntable (Can be use in IPX3-6) :
1、Φ800
2、Height:700~1200
3、Speed :: -3r/min
4、Time set: 0~99mm
Review


1/3
X