The test device is designed according to IEC 60598-1-2014 Appendix C, GB 19510.4-2009 Article 16 and the requirements of Standard Figure 1 and GB 19510.13-2007 Article 17 and the requirements of Figure 2, IEC 61347-1 Annex B, IEC 61347-2-3 Section 15,16.
Test device is designed according to IEC 60598-1-2014 Appendix C, GB 19510.4-2009 Article 16 and the requirements of Standard Figure 1 and GB 19510.13-2007 Article 17 and the requirements of Figure 2, IEC 61347-1 Annex B, IEC 61347-2-3 Section 15,16. Technical parameters.
Contains 3 circuits C1 C2 C3
Power: > 1000W
Adjustable resistance: 0 to 200.00Ω, can carry current 1A
Resistance value error: 3%
Voltage accuracy: 0.1V
Current accuracy 0.01A
Diode D:100A,600V
The characteristics of the rectifier tube are described below:
Reverse peak voltage URM ≥ 3000 V
Reverse leakage current IR≤10μA
Forward current IF ≥ three times the nominal operating current of the lamp
Reverse recovery time
(Maximum frequency: 150 kHz) (Measurement conditions: IF=0.5A, and IR=1 A to lR=0.25 A)
Includes dedicated circuit box.
Environment of use
Power supply conditions: AC 220V±10%, 50 Hz. Operating temperature 15~40℃ Relative humidity ≤85%
