Products

Capacitor pin bending, twisting, pulling comprehensive performance tester SH6608

Capacitor pin lag bending tester is designed according to the relevant standard requirements of IEC60068, Capacitor pin lag bending tester mainly used to test the deformation state of pin lag under the action of pull force, bending and reverse.
INQUIRY
Description
 Capacitor Pin Lag Bending Pull Force Test/Testing Machine


        Capacitor pin lag bending tester is designed according to the relevant standard requirements of IEC60068, Capacitor pin lag bending tester mainly used to test the deformation state of pin lag under the action of pull force, bending and reverse.
Technical parameters:

1. Power supply: AC 220V ± 10% 50Hz.

2. Tension: vertical loading weight; loading time 0-60s continuously adjustable.

3. Bend: bend one lead at a time.

4. Bending angle: 45 °, 90 ° (bidirectional bending)

5. Accuracy: ± 2 °.

6. Bending rate: 1s-10s / time;

7. Accuracy: ± 3%.

8. Bending times: 1-999 times; accuracy: ± 1 time.

9. Torsion angle: 180 ± 2 °.

10. Loading weight: 8 pieces of 0.5N, 1n, 1.25n, 2.5n, 5N, 10N, 20n and 40n;
Accuracy: ± 1%.

11. Driving mode: stepper motor.

12. Controller: PLC.

13. Display mode: touch screen display.

14. Including a set of test fixture.