The SH9601B Hose Abrasion Test Apparatus is designed in accordance with BS6391 Annex I, simulating the abrasion condition of fire-fighting hoses under working status. Driven by a pneumatic cylinder, the Al2O3 abrasing strip carrier would move reciprocally
The SH9601B Hose Abrasion Test Apparatus is designed in accordance with BS6391 Annex I, simulating the abrasion condition of fire-fighting hoses under working status. Driven by a pneumatic cylinder, the Al2O3 abrasing strip carrier would move reciprocally, rubbing against the hose’s(with water) surface at a 45° angle.
Technical Parameters
Power supply: 220V 50Hz
Driving: pneumatic cylinder
Chamber Dimension: 2000mm×800mm×1400mm(Length×Width×Height) Test Operation Surface 900mm height to the ground
Chamber Material: 304 stainless steel
Equipped with a splash-proof glass cover for a test observation
Downward Force: 15.5N(applied through counterbalance)
Stroke Length: 230mm
Strip Cloth: 25mm×300mm 70% Al2O3 material(replace a new before each test)
Hose Fixture: available for dimensions of hose within Φ100mm-Φ300mm
Test Angle: 45°(between strip cloth carrier and hose fixture)
Test frequency(adjustable): 30-70 cycles/min(double strokes for each cycle)
Digital Meters Version
Stroke Frequency Controller(manual)
Digital Counter
Water Pressure Gauge(maximum range>0.7Mpa)
Touch Screen Version
PLC Controller+7 Inches Color Screen
Test Frequency preset on screen
Water Pressure, Number of Cycles, and Test Frequency are displayed on the screen
Equipped with RS-232 interface for test data export
NOTE: The compressed air source used in the pneumatic cylinder should be self-prepared by users.