Products

Ballast pulse tester for lamps with integral starting device

Item No.: SH3329A
Designed in accordance with IEC 61347-2-8,, Article 15.1 and Appendix I and Figure I.1,
INQUIRY
Description
Designed in accordance with IEC 61347-2-8,, Article 15.1 and Appendix I and Figure I.1,
Technical parameters.
  1. Equipped with a vacuum relay for pulsing, with a closing time of 3 to 15ms
  2. On/off time: 1~99s settable
  3. With adjustable varistor
  4. High voltage module: 1KV, 2KV, 3KV, 4KV, 5KV, 6KV 2 each
  5. Low voltage module: 100V to 900V in 100V increments for a total of 9 steps, 2 for each step
  6. The external oscilloscope can be connected to observe the voltage of capacitor C2 (customer provides the oscilloscope)
  7. Capacitance accuracy 5%
  8. Adjustable resistor R1:MAX 100±1%1A current
  9. Adjustable resistor R2:MAX 1000±1%1A current (R2:≥ ballast resistance X20)
  10. Current range: 0~200mA,
  11. Accuracy: ±1.5%
  12. Forward and reverse diodes, at least 10 per group, with or without optional connection to the circuit
  13. Electrostatic voltmeter for measuring pulse voltages with a self-capacitance of up to 30pF
  14. Power protection devices
  15. Switch control available: optional
  16. C1=0,66 μF
  17. C2=5 000 pF
  18. C3= 50 pF
  19. D1 = Diode ZD22
  20. D2 = diode IN4004
  21. D:= Diodes (6) BYV96E
  1. Environment of use
Power condition: AC 220V±10%, 50 Hz.
Review


1/3
X