Products
Temperature test chamber for temperature-sensitive fire alarms
Temperature test chamber for temperature-sensitive fire alarms
To test the response time threshold of the fire detector. The main tests are time response tests tests, etc.
Wires and Cables Smoke Density Testing System
Wires and Cables Smoke Density Testing System
This SH5707B Wires and Cables Smoke Density Testing System is designed according to the requirements of IEC 61034 and is applicable to the evaluation of the burning characteristics of cables or optical fiber cables.
Lamp holder bending test device
Lamp holder bending test device
It is designed according to chapter 16.5 relevant standard requirements of clause no, 4.4.4 of IEC IEC60598.
Test chain
Test chain
Designed according to the requirements of IEC60598.
Lamp chain winding test device
Lamp chain winding test device
According to IEC 60598 Figure 3 and IEC 60598-2-20 in 20.6.14 section requirements
Test pin
Test pin
It is designed according to the requirements of IEC 60884-1. Mainly used to check-up the electric shock performance of the plugs and sockets and other electrical annexes.
Free fall Test device (Packing mechanical strength)
Free fall Test device (Packing mechanical strength)
It is mainly used to evaluate the impact of the packaging in the actual transportation, loading, and unloading process, to assess the impact resistance of the packaging in the handling process, and to the reasonableness of the packaging design.
Vertical Combustion Testing Machine for Wire and Cable SH5502
Vertical Combustion Testing Machine for Wire and Cable SH5502
It is designed according to IEC60332-1-1,1-2-2004 Requirements.
Combustion Toxicity Testing Chamber
Combustion Toxicity Testing Chamber
The SH5508B Toxicity Testing Chamber is designed in compliance with the British Navel Engineering Standard NES 713. It is applicable for the toxicity assessment test of small specimens, such as wires and cables.   The chamber is an integrated test appar
Trigger impulse tester
Trigger impulse tester
The equipment is designed according to IEC 61347-2-1 Article 16 and the requirements of Figure 1
Ballast pulse tester for lamps with integral starting device
Ballast pulse tester for lamps with integral starting device
Designed in accordance with IEC 61347-2-8,, Article 15.1 and Appendix I and Figure I.1,
Standard test corner
Standard test corner
Designed according to IEC60065,  IEC 60335, and GB8898, it is used to provide temperature tests for various electrical products and meet the environmental requirements of the standard.