Products
Multifunctional temperature rise measuring instrument SH9408B
Multifunctional temperature rise measuring instrument SH9408B
Technical parameters of multi-function temperature rise tester
Test trench, the hole and the gauge which is use for the reverse direction awl angle
Test trench, the hole and the gauge which is use for the reverse direction awl angle
It is designed according to the standard requirement of IEC60884.
Contact pressure dropping measurement instrument  SH9405A
Contact pressure dropping measurement instrument SH9405A
The contact pressure drop measuring instrument tested by Guangzhou Xinhe is designed according to the requirements of GB2099. It is used to check the contact pressure drop of the non-threaded terminal of the socket and the non-removable po
Short Circuit Current Test/Testing Machine SH9461B
Short Circuit Current Test/Testing Machine SH9461B
The short-circuit current withstand tester tested by Guangzhou Xinhe is based on the requirements of standard UL-1472 clause 5.10. The switch should be able to withstand at least 1000A of the expected short-circuit current.
Socket insulation pin overheating strength tester SH9451
Socket insulation pin overheating strength tester SH9451
The overheating strength testing machine for socket insulation pins tested by Guangzhou Xinhe is designed according to the requirements in BS1363-1 and GB2099. It is used to assess the wear resistance of phase and neutral plugs with insula
Contact pressure dropping measurement instrument  SH9405B
Contact pressure dropping measurement instrument SH9405B
The contact pressure drop measuring instrument tested by Guangzhou Xinhe is based on the requirements of the corresponding provisions of the standard GB2099- 96. It is used to check the contact pressure drop of the non-threaded terminal of
Bolt bending(torque) tester SH9444
Bolt bending(torque) tester SH9444
It is designed according to the standard requirements of BS1363-1 figure 33.
Test device use in temperature testing device SH9442
Test device use in temperature testing device SH9442
Guangzhou Xinhe testing temperature test device used in accordance with the requirements of Figure 17 of BS1363, used to determine the temperature change of the plug and socket during operation. The test device for temperature rise test is
No screw terminals bending tester SH9431
No screw terminals bending tester SH9431
Guangzhou Xinhe testing non-threaded terminal bending tester is designed according to the requirements of GB2099.1, 12.3.12. It is mainly used for bending test and measuring the pressure drop of the wire after connecting it to the unthread
DC Power Load counter SH6309
DC Power Load counter SH6309
The DC power load control cabinet tested by Guangzhou Xinhe is in accordance with the requirements of UL1054 and GB10592 standards to provide DC loads for switches and other test products.
Pull Line Switch Endurance Materials Test/Testing Equipment SH9402E
Pull Line Switch Endurance Materials Test/Testing Equipment SH9402E
Guangzhou Xinhe testing pull switch life tester basis GB16915 and other requirements apply to pull switches and similar switches.
Switch and button life tester 9402Q
Switch and button life tester 9402Q
Guangzhou Xinhe tested the switch and button life tester according to standards GB2099, GB15092. 1, I EC61058 and UL.