Automatic durable electrical insulation material high voltage tracking tester
1,Technical Parameters
1. Test voltage: |
500-15000V。 |
2. Currently: |
5-60 mA (classifiable). |
3. Short-circuit current: |
100 mAh |
4. Inductance: |
1.2H ~ 1.5H hollow inductor |
5.weight: |
50kg |
6. Secondary current limiting resistor: |
15K |
7.Carton volume: |
0.1 cubic meters. |
8. The force of the electrode on the sample: |
50 g(+5 g). |
9. Configuration: |
Selection and distribution of electronic scale calibration. |
10. Overall dimensions (mm): |
600 (width) * 500 (depth) * 1200 (height). |
2. Technical parameters:
1). Current control impedance: 60, 50, 30, 15_ or set according to actual requirements, pass
The switching reaches the secondary test current requirements of 10, 20, 30, and 40 mA, respectively.
2). Test electrodes: Two pairs of burr-free stainless steel electrodes with a thickness of 0.15mm, 12.7 x 25.4, and an angle of 160 degrees, and tungsten wire electrodes with a diameter of 2.4 x 45mm. The head is a 30-degree non-burr electrode and shaft.