Guangzhou Xinhe testing door, roller shutter /
elevator door fire test device is designed in
accordance with the relevant requirements of GB /
T7633 and GB9978.1 and EN1634-1 standards.
It is applicable to test methods for evaluating
electrical insulation materials used under severe
environmental conditions by measuring the resistance
to electrical traces and erosion under the conditions
of power frequency (48-62Hz), usin
The carpet burning tester tested by Guangzhou Xinhe
is designed according to the requirements of ISO6925,
BS6307, BS4790 related standards. It is suitable for
the flame retardancy and heat shrinkage resistance of
carpets.
The carpet burning tester tested by Guangzhou Xinhe
is designed in accordance with the relevant standards
of GB11049 and ISO6925. This standard specifies the
surface combustion performance test method of carpets
under controlled laboratory
The material fire performance testing machine tested
by Guangzhou Xinhe is manufactured in accordance with
the requirements of ISO1182-1990 and GB / 14523
standards. Under the prescribed thermal radiation
copyright law, the fire ignitabili
The flame propagation test device for the surface of
building components tested by Guangzhou Xinhe is
designed in accordance with the relevant standards of
BS476-7, and performs the fire spread test on the
surface of building component mat
The unit combustion test device of building materials
or products tested by Guangzhou Xinhe is designed
according to the requirements of EN 13823, is013943,
en13501-1, en13238, GB8624 and GB / t20284.
The joint fire resistance test device tested by
Guangzhou Xinhe is designed according to relevant
requirements of I is019921 and gb19922 standards. It
is used for fire resistance test of pipes and pipe
joints for marine and similar purposes under
The test control system is composed of temperature sampling control system, thermal radiation tester, signal acquisition system, computer system, and reasonable test and sampling circuit.
The critical radiant flux testing machine for flooring materials tested by Guangzhou Xinhe is designed according to the requirements of is09239-1 and GB / t11785 (radiant heat source method for the determination of burning performance of flooring material
The smoke producing toxicity testing machine for materials tested by Guangzhou Xinhe was designed according to the requirements of gb20285, din53436 and JIS a1321.
The hot wire tester is suitable for fire hazard test and combustion performance test of electrical and electronic products, home appliances and their materials.
