Products
Capacitance and Loss Tester (Low Voltage Method)
Capacitance and Loss Tester (Low Voltage Method)
According to the requirements of IEC 60252-1 standard, it can test the capacity, loss angle and other parameters of capacitors under different voltages and frequencies.
Capacitance and loss angle tangent test
Capacitance and loss angle tangent test
According to the relevant requirements of IEC 60252-1 standard, test capacitors at different voltages, different frequencies, capacity, loss angle and other parameters; can be used to measure the high voltage, high-current method, the capacitance capacity
Capacitance Impulse Voltage Tester
Capacitance Impulse Voltage Tester
Capacitor impulse voltage tester is designed according to IEC60384-14 standard, it is a high voltage DC impulse voltage tester, with over-current and over-voltage protection circuit, and is equipped with a good safety performance test fixture.
Resistive power load cabinet
Resistive power load cabinet
​​​​​​​Resistive power load control cabinet is designed according to the national standards on the structure of electrical accessories, electrical life and other relevant provisions of the supporting equipment. It is designed and manufactured according to
Capacitors pyrophoric test bench SH6609
Capacitors pyrophoric test bench SH6609
Guangzhou Sunho test-bed for spontaneous combustion of capacitor is designed according to IEC60384-14.4.18 to test the spontaneous combustion of capacitor.
Capacitor pin bending, twisting, pulling comprehensive performance tester SH6608
Capacitor pin bending, twisting, pulling comprehensive performance tester SH6608
Capacitor pin lag bending tester is designed according to the relevant standard requirements of IEC60068, Capacitor pin lag bending tester mainly used to test the deformation state of pin lag under the action of pull force, bending and reverse.
Capacitors destructive testing device SH6605
Capacitors destructive testing device SH6605
Test cabinet with high-grade anti-static spray standard cabinets, the color is white  Display and control: 10-inch color touch screen + Omron PLC intelligent controller, friendly interface.All the test parameters of AC and DC voltage, current, test time a
Capacitor withstand voltage test device SH6604
Capacitor withstand voltage test device SH6604
It is designed according to the standard requirements of IEC60252, used for the interelectrode withstand voltage and shell withstand voltage test for electric capacitor.
Capacitor Self-healing test device SH6603
Capacitor Self-healing test device SH6603
It is designed according to the standard requirements of IEC60252 and IEC384, used for capacitor self-healing test.
Electric capacity charging/discharge test device SH6602
Electric capacity charging/discharge test device SH6602
The capacity charge and discharge test device tested by Guangzhou Sunho is designed according to IEC 384-2. The capacitor charge and discharge test device is suitable for the charge and discharge test of fixed capacitors.
Electric capacity endurance test device SH6601A
Electric capacity endurance test device SH6601A
Touch screen control and display. Long-term durability and gap durability can be select through the screen.
 1