Products
Wire and cable beating testerSH5512
Wire and cable beating testerSH5512
Peening wire and cable tester is designed according to the standard of BS6387: This test equipment used to test the wire and cable under the overheating and the over-flow and other unnormal conditions, the flame retardancy function of the insuler.
Electrical products power cord twist testerSH9309C
Electrical products power cord twist testerSH9309C
It is design according to the relevant standard requirements of UL964. Mainly for connector of the electrical products and the line to go on the distort test.
Wire and cable Short-circuit test deviceSH5515
Wire and cable Short-circuit test deviceSH5515
Simulate fire hazard test environment, wires and cables on real burning environment, do test for wires and cables on special current short-circuit condition. Test data is used to assess the burning performance of materials at fire hazard.
Wire and Cable spark testerSH2500
Wire and Cable spark testerSH2500
Tester shell and important parts adopts stainless steel, corrosion resistant and durable, the pearl necklace and gap adopted by tester electrode are designed according to relevant standard requirements. Attached with interlock switch, mechanical chain gro
Wire and cable fire resistance testerSH5509C
Wire and cable fire resistance testerSH5509C
The shell of the test chamber and the important components are all manufactured by stainless steel, resistant cigarettes and gas corrosion; The automatic degree of control system is high, has automatic ignition function, temperature and time figures show,
Wire and cable water spray burning testerSH5511
Wire and cable water spray burning testerSH5511
It is designed according to the standard of BS6387: This test equipment used to test the wire and cable under the overheating and the over-flow and other unnormal conditions, the flame retardancy function of the insulation layer.
Hot extend performance testerSH9317
Hot extend performance testerSH9317
It is design according to the relevant standard requirements of?the IEC60811. Detect the insulation of wire and cable and sheathing, the elongation under the hot and load conditions and the permanent deformation.
Three idler pulley twist testerSH9311D
Three idler pulley twist testerSH9311D
It is design according to the relevant standard requirements of IEC245-1(1980) and IEC60245 and the national standard of IEC60227, apply to wire and cable and inspection departments for the wire and cable and soft line to do the dynamic song torsion test.
Bomb tester SH9350
Bomb tester SH9350
It is designed according to the standard requirements of IEC60811. this device is applied to the aging test for wires, cables, rubber(plastic, artificial leather) jacket and insulated layer as well as others high polymer materials in medium existing oxyge
Automatic circle line wearproof testerSH9308
Automatic circle line wearproof testerSH9308
It is design according to the relevant standard requirements of IEC60335 on the endurable wear of automatic winder. Mainly used for assessing the automatic winder of the household electrical appliances or the electrical appliances annex (such as vacuum cl
power cable tortuous Testing Machine
power cable tortuous Testing Machine
●Power supply:AC220V  50HZ±10% ●Test speed:60次/min(rpm)(from left to right count once) ●Bending angle:90°(left and right each 45°)
Wire and cable fire tester
Wire and cable fire tester
Wire and cable fire resistance tester is designed according to the relevant standard requirement of IEC60331 and BS6387.
 12