Products
Door and curtain fire resistance test device SH5729A/B
Door and curtain fire resistance test device SH5729A/B
Guangzhou Xinhe testing door, roller shutter / elevator door fire test device is designed in accordance with the relevant requirements of GB / T7633 and GB9978.1 and EN1634-1 standards.
High pressure indentation tester SH5202A
High pressure indentation tester SH5202A
It is applicable to test methods for evaluating electrical insulation materials used under severe environmental conditions by measuring the resistance to electrical traces and erosion under the conditions of power frequency (48-62Hz), usin
Carpet glow burning tester  SH5713A
Carpet glow burning tester SH5713A
The carpet burning tester tested by Guangzhou Xinhe is designed according to the requirements of ISO6925, BS6307, BS4790 related standards. It is suitable for the flame retardancy and heat shrinkage resistance of carpets.
Carpet glow burning tester SH5713B
Carpet glow burning tester SH5713B
The carpet burning tester tested by Guangzhou Xinhe is designed in accordance with the relevant standards of GB11049 and ISO6925. This standard specifies the surface combustion performance test method of carpets under controlled laboratory
Material ignition performance testing machine SH5711A
Material ignition performance testing machine SH5711A
The material fire performance testing machine tested by Guangzhou Xinhe is manufactured in accordance with the requirements of ISO1182-1990 and GB / 14523 standards. Under the prescribed thermal radiation copyright law, the fire ignitabili
Building component surface flame spread test device SH5730C
Building component surface flame spread test device SH5730C
The flame propagation test device for the surface of building components tested by Guangzhou Xinhe is designed in accordance with the relevant standards of BS476-7, and performs the fire spread test on the surface of building component mat
Building material single combustion test device SH5724
Building material single combustion test device SH5724
The unit combustion test device of building materials or products tested by Guangzhou Xinhe is designed according to the requirements of EN 13823, is013943, en13501-1, en13238, GB8624 and GB / t20284.
Tube tie-in fire resistant test device SH5725
Tube tie-in fire resistant test device SH5725
The joint fire resistance test device tested by Guangzhou Xinhe is designed according to relevant requirements of I is019921 and gb19922 standards. It is used for fire resistance test of pipes and pipe joints for marine and similar purposes under
Cone Calorimeter SH5735
Cone Calorimeter SH5735
The test control system is composed of temperature sampling control system, thermal radiation tester, signal acquisition system, computer system, and reasonable test and sampling circuit.
Floor material critical radiate flux tester SH5722
Floor material critical radiate flux tester SH5722
The critical radiant flux testing machine for flooring materials tested by Guangzhou Xinhe is designed according to the requirements of is09239-1 and GB / t11785 (radiant heat source method for the determination of burning performance of flooring material
Material smoke production toxicity tester SH5723
Material smoke production toxicity tester SH5723
The smoke producing toxicity testing machine for materials tested by Guangzhou Xinhe was designed according to the requirements of gb20285, din53436 and JIS a1321.
Glow wire tester SH5131(A/B/C)
Glow wire tester SH5131(A/B/C)
The hot wire tester is suitable for fire hazard test and combustion performance test of electrical and electronic products, home appliances and their materials.
 123