Products

Automotive interior accessories burning tester

Item No.: p24
It is designed according to the relevant standards requirements of GMW3232, FMVSS302, ISO379 and ASTMD5132.
INQUIRY
Description
It is designed according to the relevant standards requirements of GMW3232, FMVSS302, ISO379 and ASTMD5132.
1.The test equipment used to test the fire retardant properties of the car interior materials under the condition of trouble and abnormal conditions.
2.The tester is composed by the test part and control part, using the integrated design, to facilitate the installation at the scene and debug. The shell of the test chamber and the important components are all manufactured by stainless steel, resistant cigarettes and gas corrosion; The automatic degree of control system is high, has automatic ignition function, time and temperature figures show, so that the observation and records are facilitate and the use of it is stable and reliable.
3.Power supply: AC220V±10%/50Hz.(Other power specifications can be customized)
4.Use the gas or liquefied petroleum gas as the source gas of the pilot flame (Under the conditions of the proposed, suggest the elect of temperament better gas ),the inner diameter of the burner Φ is 9.5±0.5mm, has air-conditioned hole. 
5.The height of the flame is moderate, according to the standard requirement can be adjusted from 20mm to 100mm.
6.The imposing time and holding time of the flame can be adjusted in the scope of 0 to 99 minutes and 99 seconds. 
7.The process of the test is automatic control.
8.Configuration: With temperature table, can test the temperature state in the test
9.The size of the test stand is 560*150, the positioning height is 20.